Machine Sheds · Forest Lake Pole Barns
Machine Shed Builders in Forest Lake, MN
Big doors and clear span room for tractors and equipment. Get your free quote.
Machine Sheds across Anoka, Washington and Chisago counties
Get a Free Machine Shed Quote
Tell us the size, what it's for and where the land is. A builder calls you back with a free quote.
- Free quotes
- No obligation
- Shells to finished buildings
- Site prep included
Fill out the form below for your free quote 👇
Machine Sheds
Machine Shed Builders for Forest Lake, MN
Hobby farms and acreage north of the metro fill up with equipment faster than owners expect: a compact tractor, a brush hog, a skid steer, a trailer, a hay wagon. A machine shed puts it all under one roof with big doors on one or both ends, so nothing has to be backed in sideways.
Width is the choice that matters. A wider clear span means fewer interior posts, and fewer posts means easier turning. Door height depends on the tallest piece you own, with an allowance for what you may buy next. A concrete floor helps for working on equipment, and a gravel floor is fine for storage.
What's included
What goes into machine sheds
- 01
Door sizing
Sliding or overhead doors cut to your tallest equipment with room to spare.
- 02
Clear span trusses
Trusses engineered for the local snow load across wide openings.
- 03
Concrete or gravel floor
A reinforced slab for a work bay, or compacted gravel for plain storage.
- 04
Gravel approach
A graded drive and apron so heavy equipment does not rut the entry.
- 05
Lean-to wings
Open-sided storage along one wall for hay or implements.
- 06
Power and light
Service for lights, outlets and a welder where you want it.
Building ideas
Machine Sheds: what they can look like
Example photos of the building type.
How it works
How a machine shed job works
- 1
List the equipment
Heights and widths of everything that will go inside.
- 2
Plan and permit
Agricultural use and zoning are sorted with the township.
- 3
Set the frame
Posts and trusses go up first, then steel.
- 4
Doors and floor
The big doors, floor and apron finish the shed.
Questions
Machine Sheds FAQs
How wide should a machine shed be?
Wide enough to turn your largest piece without backing out. Think about the equipment you will buy in five years, not only what is parked today.
What affects the cost of a machine shed?
Width and length, wall height, door size and count, the floor, and the dirt work. Big doors and tall walls add steel and structure. Your builder prices those against the use.
Is a machine shed exempt from permits?
Buildings on a working farm may be exempt from the State Building Code, but you still deal with setbacks and county land-use rules. Hobby acreage is often treated differently from a working farm, so ask early.
How does snow affect a wide building?
Wide spans carry more roof, so trusses are engineered for the ground snow load, and drift off any taller roof next to a lean-to is added to the design.
Can the floor be gravel?
Yes. Gravel works for storage, drains well on the sand plain and costs less than concrete. Pour a slab only where you will work on equipment or need a clean surface.
Related buildings
You might also be planning
Post Frame Buildings
Engineered post frame construction for barns, shops, small commercial and anything between.
More on post frame buildings
Pole Sheds & Storage Buildings
Storage buildings for pontoons, RVs, campers, fish houses, snowmobiles and hay.
More on pole sheds & storage buildings
Horse Barns
Horse barns with stalls, aisles, tack rooms and run-ins, ventilated and built for Minnesota winters.
More on horse barns
Where we build
Machine Sheds in these towns
We build machine sheds with big sliding doors in every town below.
Ready to price your machine shed?
Free quotes. Call or fill out the form.